Home > Industrial Fieldbus > Fieldbus Isolator

Ci-AA200/DD200/OO200 Series

Name: Ci-AA200/DD200/OO200 Series
Brand: Comark | Industrial Ethernet Switch | Industrial Fieldbus | Device Networking
SKU: 00190-
Availability: InStock
Rating: 5 (1 reviews)

CAN / DeviceNet / CANopen Isolator

Provide 2 CAN bus interface
In line with CAN2.0A/B, DeviceNet, CANopen protocol
Communication rate up to 500Kbps
2 Ports isolation function, support star link
Support CAN electrical isolation, 1KV isolation voltage
Support Fieldbus ports error Relay alarm output
120 ohm termination resistor, use corresponding switch to make it to be enable
Provide 3 LED status indicators
Input voltage: 18~36VDC, Dual redundant power input with 1500V high voltage isolation
IP40 protection, Metal case, 35mm DIN-Rail Mounting
Support -40~85℃ wide operating temperature range

Add to Inquiry Contact Us

Overview Specifications Models Resources

Overview

Overview of CAN / DeviceNet / CANopen Isolator

This series of products is a can series bus isolator, in line with the CAN2.0A/B, DeviceNet, CANOpen protocol Fieldbus standards, rate adaptive, 2-channel bus interface data forwarding, electrical signal isolation and cable system to provide a star link. It also equips with 18~36V DC wide power input (9~18V DC customizable), alarm relay output, power supply redundancy and other advantages.This series of products featured with industrial design, IP40 protection level, wave pattern aluminum reinforced casing,35mm DIN rail installation, it has the Fieldbus ports error Relay alarm output, redundancy power supply and isolation protection etc. It equipped with -40~85℃ wide temperature range, can meet the requirements of a variety of industrial sites.

Specifications

Specifications of CAN / DeviceNet / CANopen Isolator

Serial Port	2 Port, Interface form: 5.08mm pitch terminal blocks In line with the recommendations of the organization of CiA and ODVA Support CAN/DeviceNet/CANOpen bus standard Baud Rates: DeviceNet/CANOpen full rate adaptation, up to 500Kbps Support electrical isolation, 1KV isolation voltage Provide 4KV lightning protection function 120 ohm termination resistor, use corresponding switch to make it to be enable
Power Supply	DC (18~36V) dual redundant power input (can be customized with 9~18VDC) Industrial standard voltage DC 24V, consumption is less than 1.5W DC 1500V voltage isolation and reverse connect protection 5.08mm industrial terminal port
Protection	Relay: Fiber link fault alarm Contact rating: 1A @24V DC, Industrial Terminal port
Mechanical	Dimensions (H×D×W): 136mm×104.8mm×52.8mm Weight: 800g Casing: IP40 protection, wave grain aluminum reinforce case option Installation: Wall mounting or DIN rail mounting
Environmental	Operating Temperature:-40℃~85℃ Storage Temperature: -40℃~85℃ Ambient Relative Humidity: 5%~95%(non-condensing)
Certification	IEC61000-4-2 (ESD): Power ±2KV Contact, ±15KV Air Relay ±2KV Contact, ±15KV Air; Data Cable ±15KV Air IEC61000-4-4 (EFT):Power ±4KV, Data Cable ±4KV IEC61000-4-5 (Surge):Power ±2KV CM/ ±1KV DM, Relay±2KV CM/ ±1KV DM IEC60068-2-27 (Shock) IEC60068-2-32 (Free Fall) IEC61000-6-2 (General Industrial Standard)
Warranty	5 years

Models

Models of RS-485 Serial Optical Fiber Repeater

Available Models	Bus Protocol
Ci-AA200	CAN
Ci-DD200	DeviceNET
Ci-OO200	CANopen

Resources

Name	Version	Date
Ci-AA200/DD200/OO200 Series Datasheet	V1.2.0	2024-09-03
Ci-AA200/DD200/OO200 Series Quick Installation Guide	V2.0.1	2024-09-03