Overview of 10-Port Serial Port Combo Managed Industrial Ethernet Switch
CK6080S/CK6042S/CK7080S/CK7042S series are 10-port 100M/Gigabit Layer 2 Managed Industrial Ethernet Switch. This series provide 100M copper ports,100BaseFX fiber and Gigabit fiber ports (SFP slots). It adopt DIN-Rail or wall mounting, which can meet the requirements of different scenes.
Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS, IGMP Static Multicast, Port Trunking, Port Mirroring, etc. This series also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
This series are designed for flexible industrial circumstances, it integrated serial server supporting transport of four channels of RS-232 or RS-422/RS-485 data. It provide one RS232 serial port and one optional RS422/RS485 serial ports or three RS485 serial ports which support transfer serial data on Ethernet. It embedded Modbus TCP and Modbus RTU protocols can connect Modbus devices on Ethernet readily.
CK6080S/CK6042S/CK7080S/CK7042S series support two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. CK6044/6062/6071/6080 series can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.
| Standard & Protocol |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow Control IEEE 802.1Q for VLAN |
| Features |
QoS Setting to improve the quality of the service Port MAC-address learning and statistics Port Enable/Disable, Speed or Mode Setting, Flow control Unicast/Multicast MAC-address Management IGMP Snooping to filter Multicast traffic GMRP Industrial Multicast registration protocol for application in substation Auto-recovery redundant CK-Ring (Full-load failure recovery time < 20ms) Warning by Relay output |
| Management |
Web, CLI and SNMP V1/V2C/V3 Management CLI can login with Telnet and CONSOLE |
| Redundancy Protocol |
CK-Ring, STP/RSTP |
| Interface |
RJ45 port: 10/100BaseT(X) Fiber port: 100BaseFX 100M full Duplex (default SC port, FC/ST optional) SFP port: 1000M SFP port, 1000M optic fiber or RJ45 Console: RS-232(RJ45 port) Warning: 1 relay, current load DC24V/1A Power: Dual inputs, 2 pluggable four-pins power terminal |
| Serial Port |
Serial Port: RS232 110~115.2Kbps, supports RXD/TXD/GND lines Full-Duplex mode, RS485 supports A/B half-duplex mode RS422/485 Baud rate: 110~115.2Kbps Support ModbusTCP, ModbusRTU protocols Modbus Slave mode supports 12 TCP Master connections |
|
Switching Characteristic |
10M Forward: 14881pps 100M Forward: 148810pps Method: Store and forward Width: 5.6Gbps Cache: 1Mbits MAC: 8K |
|
Power Supply |
Wide DC power input 12~48VDC (12V/24V/48V Typical) Full-load Consumption: < 12W (@24VDC) |
|
Physical Characteristic |
Dimensions(W×H×D): 50mm×150.5mm×125.5mm Weight: 900g Housing: Metal, IP40 protection Installation: Wall mounting or DIN rail mounting |
|
Environment Limits |
Work Temp: -40~85°C Storage Temp: -40~85°C Relative Humidity:5%~95%(non-condensing) |
|
Industrial Standard |
IEC61000-4-2 (ESD): Power ±2KV Contact, ±15KV Air IEC61000-4-4 (EFT):Power ±4KV, Data Cable ±4KV IEC61000-4-5 (Surge):Power ±2KV CM/ ±1KV DM, Relay±2KV CM/ ±1KV DM IEC60068-2-27 (Shock)IEC60068-2-32 (Free Fall) IEC61000-6-2 (General Industrial Standard) |
|
Warranty |
5 years |
|
Available Models |
100M Copper Port |
Fiber Port |
RS-232 |
RS-485 |
RS-422 |
|
CK6080S-04 |
8 |
— |
1 |
3 |
— |
|
CK6080S-03 |
8 |
— |
1 |
1 |
1 |
|
CK6042S-04 |
4 |
2×100BaseFX |
1 |
3 |
— |
|
CK6042S-03 |
4 |
2×100BaseFX |
1 |
1 |
1 |
|
CK7080S-04 |
8 |
2×1000M SFP slots |
1 |
3 |
— |
|
CK7080S-03 |
8 |
2×1000M SFP slots |
1 |
1 |
1 |
|
CK7042S-04 |
4 |
2×100BaseFX + 2×1000M SFP slots |
1 |
3 |
— |
|
CK7042S-03 |
4 |
2×100BaseFX + 2×1000M SFP slots |
1 |
1 |
1 |
|
Name |
Version |
Date |
|
V1.2 |
2024-09-19 |
