CK7080/7071/7062/7044 Series

10-port 100M / Gigabit Layer 2 Managed Industrial Ethernet Switch

10 ports 100M/Gigabit combined Managed Ethernet Switch
Managed with Web, CLI and SNMP, CLI can login with Telnet and CONSOLE
QoS, IGMP, 802.1Q VLAN to ease network planning
RSTP and CK-ring for network redundancy, Recovery time < 20ms
Warning by relay output for power, ports and network status
Metal housing with IP30 protection, EMC industrial level 4 supported
Wide range voltage redundant dual inputs, full-load power consumption < 12W
DIN-Rail Mounting and Wall Mounting supported
Support -40~85°C wide operating temperature range
Overview Specifications Models Resources

Overview of 10-port 100M / Gigabit Layer 2 Managed Industrial Ethernet Switch

CK7080/7071/7062/7044 series are 10-port 100M/Gigabit Layer 2 Managed Industrial Ethernet Switch. This series provide 100M copper ports and Gigabit fiber ports (SFP slots). It adopt DIN-Rail or wall mounting, which can meet the requirements of different scenes.

Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS, IGMP Static Multicast, Port Trunking, Port Mirroring, etc. This series also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

CK7080/7071/7062/7044 series support two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. CK6044/6062/6071/6080 series can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.


10-port 100M / Gigabit Layer 2 Managed Industrial Ethernet Switch

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

IEEE 802.1Q for VLAN

Advanced Features 

QoS Setting to improve the quality of the service

Port MAC-address learning and statistics

Port Setting: Enable/Disable, Speed or Mode setting, Flow control

Rate-limit to optimize the bandwidth of network

Port Trunking to expand the bandwidth and improve the efficiency of the network

802.1Q VLAN to control multicast domain

Unicast/multicast MAC-address management

IGMP Snooping to filter multicast traffic

GMRP industrial multicast registration protocol for application in substation

Auto-recovery redundant CK-Ring (full-load failure recovery time < 20ms)
Supports Single-Ring, Tangency-Ring and Intersection-Ring

Warning by relay output

Rich network system management


Web, CLI and SNMP  V1/V2C/V3 management

CLI can login with Telnet and CONSOLE
Port Mirroring to debug online or monitor the data status

Redundancy Protocol



RJ45 port: 10/100BaseT

Fiber port: 100BaseFX 100M full Duplex (SC/FC/ST optional), Max. 120KM

SFP port: 1000M SFP port, 1000M optic fiber or RJ45 interface optional

Console: RS-232(RJ45 port)

Warning: 1 Relay, current load DC24V/1A

Power: Dual inputs, 2 pluggable four-pins power terminals

Switching Characteristic

10M Forward: 14881pps

100M Forward: 148810pps
1000M Forward: 1488100pps

Method: Store and forward

Width: 5.6Gbps

Cache: 1Mbits


Power Supply

Wide DC power input 12~48VDC (12V/24V/48V Typical)
7.62mm pitch terminal blocks

Full-load Consumption: < 12W (@24VDC)

Physical Characteristic

Dimensions(W×H×D): 150mm×125.5mm×50mm

Weight: 900g

Housing: Metal, IP40 protection

Installation: Wall mounting or DIN rail mounting

Environment Limits

Work Temp: -40~75°C

Storage Temp: -40~85°C

Relative Humidity:5%~95%(non-condensing)

Industrial Standard

IEC61000-4-2 (ESD): Power ±2KV Contact, ±15KV Air
IEC61000-4-4 (EFT):Power ±4KV, Data Cable ±4KV
IEC61000-4-5 (Surge):Power ±2KV CM/ ±1KV DM, Relay±2KV CM/ ±1KV DM
IEC60068-2-27 (Shock)IEC60068-2-32 (Free Fall)
IEC61000-6-2 (General Industrial Standard)


5 years


Available Models

100M Copper Port

100M Fiber Port

Gigabit SFP Slot 


















  CK7220M Series Datasheet