CK7110M Series

8/10-port Full Gigabit Layer 2 Managed Industrial Ethernet Switch

2~8 10/100/1000BaseT(X)  Copper ports
0~8 1000Base-SFP slots
Managed with Web, CLI and SNMP, CLI can login with Telnet and CONSOLE
QoS, IGMP, GMRP, 802.1Q VLAN to ease network planning
RSTP and CK-ring and ERPS for network redundancy
Warning by relay output for power, ports and network status
Metal housing with IP40 protection, EMC industrial level 3 supported
Wide range voltage (12~48V DC) redundant dual inputs, full-load power consumption < 11W
DIN-Rail Mounting and Wall Mounting supported
Standard operating temperature -40~85°C to satisfy harsh industrial environment
Overview Specifications Models Resources

Overview of 8/10-port Full Gigabit Layer 2 Managed Industrial Ethernet Switch

      CK7110M series is 8/10-Port Full-Gigabit Managed Industrial Ethernet switches. This series provide 1000M copper port and 1000M SFP optical port. It adopt DIN-Rail or wall mounting, which can meet the requirements of different scenes.
          Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS, IGMP Static Multicast, Port Trunking, Port Mirroring, etc. This series also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
          CK7110M series support two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. CK7110M series can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

    8/10-port Full Gigabit Layer 2 Managed Industrial Ethernet Switch

    Standard & Protocol

    IEEE 802.3 for 10Base-T

    IEEE 802.3u for 100Base-TX

    IEEE 802.3z for 1000Base-X

    IEEE 802.3x for Flow Control

    IEEE 802.1Q for VLAN

    Advanced Features 

    QoS Setting to improve the quality of the service

    Port MAC-address learning and statistics

    Port Setting: Enable/Disable, Speed or Mode setting, Flow control

    Rate-limit to optimize the bandwidth of network

    Port Trunking to expand the bandwidth and improve the efficiency of the network

    802.1Q VLAN to control multicast domain

    Unicast/multicast MAC-address management

    IGMP Snooping to filter multicast traffic

    GMRP industrial multicast registration protocol for application in substation

    Auto-recovery redundant CK-Ring (full-load failure recovery time < 20ms)
    Supports Single-Ring, Tangency-Ring and Intersection-Ring

    Warning by relay output

    Rich network system management


    Web, CLI and SNMP  V1/V2C/V3 management

    CLI can login with Telnet and CONSOLE
    Port Mirroring to debug online or monitor the data status

    Redundancy Protocol

    CK-Ring, STP/RSTP


    2~8 10/100/1000BaseT(X) RJ45 ports
    Auto-Negotiation speed(10M/100M/1000M), Auto Duplex mode and MDI/MDI-X connection

    0~8 1000M fiber SFP port

    Console: RS-232(RJ45 port)

    Warning: 1 relay, current load DC24V/1A

    Power: Dual inputs, 2 pluggable four-pins power terminals

    Switching Characteristic

    Fast forwarding speed:148810pps

    Gigabit forwarding speed: 1488095pps

    Transmission way: Store-and-forward

    Switching bandwidth: 20Gbps

    Buffer memory size: 2Mbits

    MAC address table: 8K

    Power Supply

    Wide DC power input 12~48VDC (12V/24V/48V Typical)
    7.62mm pitch terminal blocks

    Full-load Consumption: < 11W (@24VDC)

    Physical Characteristic

    Dimensions(W×H×D): 51.5mm×150.5mm×125.5mm

    Weight: 900g

    Housing: Metal, IP40 protection

    Installation: Wall mounting or DIN rail mounting

    Environment Limits

    Work Temp: -40~75°C

    Storage Temp: -40~85°C

    Relative Humidity:5%~95%(non-condensing)

    Industrial Standard

    IEC61000-4-2 (ESD): Power ±2KV Contact, ±15KV Air
    IEC61000-4-4 (EFT):Power ±4KV, Data Cable ±4KV
    IEC61000-4-5 (Surge):Power ±2KV CM/ ±1KV DM, Relay±2KV CM/ ±1KV DM
    IEC60068-2-27 (Shock)IEC60068-2-32 (Free Fall)
    IEC61000-6-2 (General Industrial Standard)


    5 years


    Models of 10-port Gigabit Layer 2 Managed Industrial Ethernet Switch

    Available Models

    Gigabit Copper Port

    Gigabit SFP Slot 



















      CK7110M Series Datasheet