Home > Industrial Ethernet > Industrial PoE Switch

CK7110MP Series

Name: CK7110MP Series
Brand: Comark | Industrial Ethernet Switch | Industrial Fieldbus | Device Networking
SKU: 00188
Availability: InStock
Rating: 5 (1 reviews)

8/10-port Gigabit Layer 2 PoE Managed Industrial Ethernet Switch

2~8 10/100/1000BaseT(X) PoE Ethernet ports
Support IEEE802.3/802.3u/802.3ab/802.3 at/af
0~21000Base-SFP slots
Managed with Web, CLI and SNMP, CLI can login with Telnet and CONSOLE
QoS, IGMP, GMRP, 802.1Q VLAN to ease network planning
RSTP and CK-ring and ERPS for network redundancy
Warning by relay output for power, ports and network status
Metal housing with IP40 protection, EMC industrial level 3 supported
Wide range voltage (12~48V DC) redundant dual inputs, full-load power consumption < 11W
DIN-Rail Mounting and Wall Mounting supported
Standard operating temperature -40~85°C to satisfy harsh industrial environment

Add to Inquiry Contact Us

Overview Specifications Models Resources

Overview

Overview of 8/10-port Gigabit Layer 2 PoE Managed Industrial Ethernet Switch

CK7110MP series is 8/10-Port Full-Gigabit Managed Industrial Ethernet switches. This series provide 1000M PoE port and 1000M SFP optical port, and the PoE power supply conforms to the protocol standard of IEEE802.3af/at. It adopt DIN-Rail or wall mounting, which can meet the requirements of different scenes. It adopt DIN-Rail or wall mounting, which can meet the requirements of different scenes.

Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS, IGMP Static Multicast, Port Trunking, Port Mirroring, etc. This series also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

CK7110MP series support two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. CK7110MP series can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

Specifications

8/10-port Full Gigabit Layer 2 Managed Industrial Ethernet Switch

Standard & Protocol	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow Control IEEE 802.1Q for VLAN
Advanced Features	QoS Setting to improve the quality of the service Port MAC-address learning and statistics Port Setting: Enable/Disable, Speed or Mode setting, Flow control Rate-limit to optimize the bandwidth of network Port Trunking to expand the bandwidth and improve the efficiency of the network 802.1Q VLAN to control multicast domain Unicast/multicast MAC-address management IGMP Snooping to filter multicast traffic GMRP industrial multicast registration protocol for application in substation Auto-recovery redundant CK-Ring (full-load failure recovery time < 20ms) Supports Single-Ring, Tangency-Ring and Intersection-Ring Warning by relay output Rich network system management
Management	Web, CLI and SNMP V1/V2C/V3 management CLI can login with Telnet and CONSOLE Port Mirroring to debug online or monitor the data status
Redundancy Protocol	CK-Ring, STP/RSTP
Interface	2~8 10/100/1000BaseT(X) RJ45 PoE ports Compliant with IEEE802.3/802.3u standard Support IEEE802.3/802.3u/802.3ab/802.3 at/af PoE wiring: Power on unused lines, V+ on pin 4 and 5, V- on pin 7 and 8 ( Endspan Mode B ) 0~8 1000M fiber SFP port Console: RS-232(RJ45 port) Warning: 1 relay, current load DC24V/1A Power: Dual inputs, 2 pluggable four-pins power terminals
Switching Characteristic	Fast forwarding speed:148810pps Gigabit forwarding speed: 1488095pps Transmission way: Store-and-forward Switching bandwidth: 20Gbps Buffer memory size: 2Mbits MAC address table: 8K
Power Supply	Wide DC power input 12~48VDC (12V/24V/48V Typical) 7.62mm pitch terminal blocks Full-load Consumption: < 11W (@24VDC)
Physical Characteristic	Dimensions(W×H×D): 51.5mm×150.5mm×125.5mm Weight: 900g Housing: Metal, IP40 protection Installation: Wall mounting or DIN rail mounting
Environment Limits	Work Temp: -40~85°C Storage Temp: -40~85°C Relative Humidity:5%~95%(non-condensing)
Industrial Standard	IEC61000-4-2(ESD): ±6KV Contact Discharge, ±15KV Air Discharge IEC61000-4-3(RS): 10V/M (80-1000MHZ) IEC61000-4-4(EFT): Power Cable ±2KV, Data Cable ±2KV IEC61000-4-5(Surge): Power Cable ±1KV CM/±1KV DM, Data Cable: ±1KV IEC61000-4-6(Radio Frequency Conduction): 3V (10KHZ-150KHZ), 10V (150KHZ-80MHZ) IEC61000-4-8（Power Frequency Magnetic Field）：100A/M COUNT 1000A/M，1S TO 3S IEC61000-4-12/18（Oscillating Wave）：2.5KV CM，1KV DM IEC61000-4-10（Damped Oscillation）：30A/M IEC61000-4-16(Common Mode Conduction ）：30V COUNT 300V，1S IEC61000-6-2(General Industrial Standards) IEC61850-3(Transformer Substation) IEEE1613(Power Substation) EN50121-4(Rail Transit）
Warranty	5 years

Models

Models of 10-port Gigabit Layer 2 Managed Industrial Ethernet Switch

Available Models	Gigabit PoE Port	Gigabit SFP Slot
CK7110P-8GTX	8	—
CK7110MP-8GTX	8	—
CK7110P-8GTX2SFP	8	2
CK7110MP-8GTX2SFP	8	2

Resources

Name	Version	Date
CK7110MP Series Datasheet	V1.0.1	2024-08-15