Overview of 2-port RS-232 / 485 / 422 to Ethernet Modbus Gateway
MG5011/5012 series is Modbus gateway designed for integrating Modbus RTU/ASCII and Modbus TCP networks; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocols. This product supports 2 RS485 or RS-422 serial port to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.
Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SNMP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
Based on industrial installation requirements, the DIN-Rail or wall mounting is provided. This product adopts the industry's excellent network program, -40~75°C working temperature range, can satisfy all kinds of industrial site requirements, provide convenient serial port communication solutions. Hardware adopts fanless, low power consumption and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system, etc.
| Ethernet |
Standard: 10Base-T, 100Base-TX Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface quantity: 1 Interface form: RJ45 Duplex mode: Full/Half Duplex Mode Self-adaptive Protocol: TCP, UDP, ARP, HTTP, ICMP, DHCP, DNS Operating mode: TCP Server, TCP Client, UDP Server, UDP Client |
| Gateway Protocols |
Built-in Modbus TCP and Modbus RTU protocols Support Modbus RTU/ASCII Support Modbus Slave mode Slave mode to maximize the support of 4 TCP master Connection |
| Serial Port |
Standard: RS-485/422, RS-232 RS-422 signal:TX+,TX-, RX+, RX-, GND RS-485 signal: D+, D-, GND RS-232 signal: TX, RX, GND Check digit: None, Even, ODD Data bits: 5bit, 6bit, 7bit, 8bit Stop bit: 1bit, 2bit Baud rate: 110~115200bps Load capacity: RS-485/422 side supports 32 point polling environment (customizable 128 points) Interface form: RS-485/422 and adopts 5-bit 5.08mm pitch terminal blocks Interface form: RS-232 and adopts DB9-M interface |
| Indicator |
Power supply indicator, Ethernet port indicator, serial port indicator |
| Power Supply | Wide DC power input 12~48VDC (12V/24V/48V typical) 7.62mm industrial terminal block No-load Consumption：< 1.2W (@24VDC) Full-load Consumption：< 1.68W (@24VDC) |
| Mechanical Properties | Dimension(W×H×D): 40mm×128mm×102mm Net weight: 300g Housing: Metal, IP40 protection Installation: DIN rail mounting |
|
Environmental |
Working temperature:-40℃~85℃ Storage temperature: -40℃~ 85℃ Relative humidity: 5% ~ 95% (no condensing) |
|
Industrial Standard |
IEC61000-4-2(ESD)：±8KV Contact, ±15KV Air IEC61000-4-3(RS)：10V/M(80-1000MHZ) IEC61000-4-4(EFT)：Power ±4KV, Data Cable ±4KV IEC61000-4-5(Surge)：Power ±4KV CM/ ±1KV DM, Data Cable±4KV IEC61000-4-6(CS)：3V (10KHZ-150KHZ), 10V (150KHZ-80MHZ) IEC61000-4-16(MS)：30V COUNT 300V, 1S IEC60068-2-6(Vibration) IEC60068-2-27(Shock) IEC60068-2-32(Free Fall) IEC61000-6-2(General Industrial Standard) |
| Warranty | 5 years |
|
Available Models |
RS-485/RS-422 |
RS-232 |
|
MG5011 |
RS-485/422 Combo | 1 |
|
MG5012 |
RS-485 x 2 |
— |
|
Name |
Version |
Date |
|
V1.2 |
2022-03-07 |
