Overview of 4-port R485/422 to Ethernet Modbus Gateway
MG5024 is a serial device servers that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This product supports 4 RS-485/422 combo serial ports to 2 100M Ethernet copper ports which supports electromagnetic isolation. It adopts DIN-Rail or wall mounting to meet the requirements of different application scenes.
MG5024 support multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports, TCP Server, TCP Client, UDP Server and UDP Client operating modes and Telnet , Web access modes.
MG5024 provide 2 10/100Base-T (x) RJ45 ports and 4-channel RS-485 serial ports. It has two separate LAN ports that can be connected to separate LAN networks. Dual-LAN redundancy involves setting up two separate physical networks to connect the PC host with the MG5024 (the PC host also requires two LAN cards). If one connection fails, the PC host can still communicate with your serial devices over the alternative LAN connection.
It is easy and convenient to centralize the management of decentralized serial devices and hosts through the network., the communication rate support 300~460800bps optional. Built-in Modbus TCP, Modbus RTU and Modbus ASCII protocol make it easy for users to connect Modbus Ethernet devices to Modbus serial devices.
Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.
| Ethernet |
Standard: 10Base-T, 100Base-TX Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface quantity: 2 Interface form: RJ45 Duplex mode: Full/Half Duplex Mode Self-adaptive Protocol: TCP, UDP, ARP, HTTP, ICMP, DHCP, DNS Operating mode: TCP Server, TCP Client, UDP Server, UDP Client |
| Gateway Protocols |
Built-in Modbus TCP and Modbus RTU protocols Support Modbus RTU/ASCII Support RTU Master mode Support Modbus Slave mode Maximum support 16 TCP master connections |
| Serial Port |
Standard: RS-485/422, RS-232 RS-422 signal:TX+,TX-, RX+, RX-, GND RS-485 signal: D+, D-, GND Check digit: None, Even, ODD Data bits: 5bit, 6bit, 7bit, 8bit Stop bit: 1bit, 2bit Baud rate: 300~460800bps Directional control: RS-485 adopts data flow auto control technology Load capacity: RS-485/422 side supports 32 point polling environment (customizable 128 points) Interface form: RS-485/422 and adopts 5-bit 3.84mm pitch terminal blocks |
| Indicator |
Power supply indicator, Ethernet port indicator, serial port indicator |
| Power Supply | Wide DC power input 12~48VDC (12V/24V/48V typical) 7.62mm industrial terminal block No-load Consumption：< 1.2W (@24VDC) Full-load Consumption：< 1.68W (@24VDC) |
| Mechanical Properties | Dimension(W×H×D): 40mm×128mm×103mm Net weight: 430g Housing: Metal, IP40 protection Installation: DIN rail mounting |
|
Environmental |
Working temperature:-40℃~85℃ Storage temperature: -40℃~ 85℃ Relative humidity: 5% ~ 95% (no condensing) |
|
Industrial Standard |
IEC61000-4-2(ESD)：±8KV Contact, ±15KV Air IEC61000-4-3(RS)：10V/M(80-1000MHZ) IEC61000-4-4(EFT)：Power ±4KV, Data Cable ±4KV IEC61000-4-5(Surge)：Power ±4KV CM/ ±1KV DM, Data Cable±4KV IEC61000-4-6(CS)：3V (10KHZ-150KHZ), 10V (150KHZ-80MHZ) IEC61000-4-16(MS)：30V COUNT 300V, 1S IEC60068-2-6(Vibration) IEC60068-2-27(Shock) IEC60068-2-32(Free Fall) IEC61000-6-2(General Industrial Standard) |
| Warranty | 5 years |
|
Available Models |
100M Copper Port |
RS-485/422 |
|
MG5024 |
2 |
4 |
|
Name |
Version |
Date |
|
V1.0.0 |
2022-03-07 |
|
|
V1.0.0 |
2022-03-07 |
