4-port RS485/422 Modbus Gateway with Digital I/O and Analog
MG5124/5224 Series are Modbus gateways designed for integrating Modbus RTU/ASCII and Modbus TCP networks; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocols. This series support RS-485/422 combo serial ports and 2 100M Ethernet copper ports. They adopts DIN-Rail or wall mounting to meet the requirements of different application scenes.
Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SNMP, SSH，SMTP, SNTP，DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 256 Modbus TCP client (master) accesses and connects up to 128 Modbus TCP server (slave) devices.
MG5124/5224 provide 2 10/100Base-T (x) RJ45 ports and 4-channel RS-485 serial ports. It has two separate LAN ports that can be connected to separate LAN networks. Dual-LAN redundancy involves setting up two separate physical networks to connect the PC host with the MG5124/5224 (the PC host also requires two LAN cards). If one connection fails, the PC host can still communicate with your serial devices over the alternative LAN connection.
The MG5124/5224 Series have built-in digital I/Os, provide maximum flexibility when you need to integrate serial equipment in the field with an Ethernet network. The combination of digital I/Os makes the device servers well-suited for a variety of industrial data acquisition applications. The DI/Os on the device can be controlled over TCP/IP using the Modbus TCP protocol and can be configured from a web browser.
MG5124/5224 products realize the signal acquisition between sensor and host, to measure analog signals. The products can be applied to RS-232/485 bus industrial automation control system, 4-20mA signal measurement, monitoring and control small-signal measurement and signal isolation and long-term industrial transmission and so on. Products include power supply isolation, signal isolation, linearization, A/D conversion and RS-485 serial communication.
| Ethernet |
Standard: 10Base-T, 100Base-TX Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface quantity: 2 Interface form: RJ45 Duplex mode: Full/Half Duplex Mode Self-adaptive Protocol: TCP, UDP, ARP, HTTP, ICMP, DHCP, DNS Operating mode: TCP Server, TCP Client, UDP Server, UDP Client |
| Gateway Protocols |
Built-in Modbus TCP and Modbus RTU protocols Support Modbus RTU/ASCII Support RTU Master mode Support Modbus Slave mode Maximum support 16 TCP master connections |
| Serial Port |
Standard: RS-485/422 RS-422 signal:TX+,TX-, RX+, RX-, GND RS-485 signal: D+, D-, GND Check digit: None, Even, ODD Data bits: 5bit, 6bit, 7bit, 8bit Stop bit: 1bit, 2bit Baud rate: 300~460800bps Directional control: RS-485 adopts data flow auto control technology Load capacity: RS-485/422 side supports 32 point polling environment (customizable 128 points) Interface form: RS-485/422 and adopts 5-bit 3.84mm pitch terminal blocks |
| Analog signal interface |
2 channel Current Analog Signal 4-20mA Reference accuracy 0.5% @ 25°C Update rates 1K~2KHz Signal resolution 10 bit Time delay < 10ms Voltage interface parameters: Voltage transmission range 0-5VDC or optional 0-10VDC, Input impendency 100KΩ 4-20mA interface parameters: Maximum load capacity 600Ω ,Input resistance 120Ω |
| Digital Outputs | Independent 2 channels output Dry contacts: Short circuit or Open Relay output form: FORM C (SPDT) Relay-operating time 6ms Relay release time 3ms Total switch time 10ms Relay contacts capacity 2A/24VDC The maximum working switch frequency: 50Hz |
| Digital Inputs | Independent 2 channels input Dry contact Input On: short to GND Off: open |
| Indicator |
Power supply indicator, Ethernet port indicator, serial port indicator |
| Power Supply | Wide DC power input 12~48VDC (12V/24V/48V typical) 7.62mm industrial terminal block No-load Consumption：< 1.2W (@24VDC) Full-load Consumption：< 1.68W (@24VDC) |
| Mechanical Properties | Dimension(W×H×D): 40mm×128mm×103mm Net weight: 430g Housing: Metal, IP40 protection Installation: DIN rail mounting |
|
Environmental |
Working temperature:-40℃~85℃ Storage temperature: -40℃~ 85℃ Relative humidity: 5% ~ 95% (no condensing) |
|
Industrial Standard |
IEC61000-4-2(ESD)：±8KV Contact, ±15KV Air IEC61000-4-3(RS)：10V/M(80-1000MHZ) IEC61000-4-4(EFT)：Power ±4KV, Data Cable ±4KV IEC61000-4-5(Surge)：Power ±4KV CM/ ±1KV DM, Data Cable±4KV IEC61000-4-6(CS)：3V (10KHZ-150KHZ), 10V (150KHZ-80MHZ) IEC61000-4-16(MS)：30V COUNT 300V, 1S IEC60068-2-6(Vibration) IEC60068-2-27(Shock) IEC60068-2-32(Free Fall) IEC61000-6-2(General Industrial Standard) |
| Warranty | 5 years |
|
Available Models |
100M Copper Port |
100M Fiber Port |
RS-485/422 |
|
MG5124 |
2 |
1 |
4 |
|
MG5224 |
2 |
2 |
4 |
