SE5024

4-port RS485/422 to 2-port 100M Ethernet Serial Device Server

Provide 4-channel RS-485/422 serial ports
Baud rate: 300~460800 bps
Dual-LAN Redundancy
Conform to TCP/IP, UDP, ARP, ICMP, HTTP and TFTP Client protocols
Provide TCP server, TCP client, UDP for serial transmission modes
Support Web management
Support serial port settings, can connect two serial devices through network for serial data transmission
Support through gateway, cross-routing communication
Low-power consumption design
Metal housing with IP40 and high level EMC protection
Support  wide  voltage 12~48V DC power input
Overview Specifications Models Resources
Overview

Overview of 4-port RS485/422 to 2-port 100M Ethernet Serial Device Server

SE5024 is a serial device servers that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This product supports 4 RS-485/422 combo serial ports to 2 100M Ethernet copper ports which supports electromagnetic isolation. It adopts DIN-Rail or wall mounting to meet the requirements of different application scenes.

SE5024 support multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports, TCP Server, TCP Client, UDP Server and UDP Client operating modes and Telnet , Web access modes. 

SE5024 provide 2 10/100Base-T (x) RJ45 ports and 4-channel RS-485 serial ports. It has two separate LAN ports that can be connected to separate LAN networks. Dual-LAN redundancy involves setting up two separate physical networks to connect the PC host with the SE5024 (the PC host also requires two LAN cards). If one connection fails, the PC host can still communicate with your serial devices over the alternative LAN connection.

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Specifications

Specifications of 4-port RS485/422 to 2-port 100M Ethernet Serial Device Server

Ethernet
Standard: 10Base-T, 100Base-TX
Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning
Interface quantity: 2
Interface form: RJ45
Duplex mode: Full/Half Duplex Mode Self-adaptive

Protocol: TCP, UDP, ARP, HTTP, ICMP, DHCP, DNS
Operating mode: TCP Server, TCP Client, UDP Server, UDP Client
Serial Port
Standard: RS-485/422, RS-232
RS-422 signal:TX+,TX-, RX+, RX-, GND
RS-485 signal: D+, D-, GND
Check digit: None, Even, ODD
Data bits: 5bit, 6bit, 7bit, 8bit
Stop bit: 1bit, 2bit
Baud rate: 300~460800bps
Directional control: RS-485 adopts data flow auto control technology
Load capacity: RS-485/422 side supports 32 point polling environment (customizable 128 points)
Interface form: RS-485/422 and adopts5-bit 3.84mm pitch terminal blocks
Indicator
Power supply indicator, Ethernet port indicator, serial port indicator
Power Supply Wide DC power input 12~48VDC (12V/24V/48V typical)
7.62mm industrial terminal block

No-load Consumption:< 1.2W (@24VDC)
Full-load Consumption:< 1.68W (@24VDC)
Mechanical Properties Dimension(W×H×D): 40mm×128mm×103mm
Net weight: 430g
Housing: Metal, IP40 protection
Installation: DIN rail mounting

Environmental 

Working temperature:-40℃~85℃
Storage temperature: -40℃~ 85℃
Relative humidity: 5% ~ 95% (no condensing) 

Industrial Standard

IEC61000-4-2(ESD):±8KV Contact, ±15KV Air
IEC61000-4-3(RS):10V/M(80-1000MHZ)
IEC61000-4-4(EFT):Power ±4KV, Data Cable ±4KV
IEC61000-4-5(Surge):Power ±4KV CM/ ±1KV DM, Data Cable±4KV
IEC61000-4-6(CS):3V (10KHZ-150KHZ), 10V (150KHZ-80MHZ)
IEC61000-4-16(MS):30V COUNT 300V, 1S
IEC60068-2-6(Vibration)
IEC60068-2-27(Shock)
IEC60068-2-32(Free Fall)
IEC61000-6-2(General Industrial Standard)
Warranty 5 years
Models



Available Models

100M Copper Port

RS-485/422

SE5024

2

4

Resources

Name

Version

Date

 SE5024 Datasheet 

V1.0.0

2022-03-07

 SE5024 Quick Installation Guide 

V1.0.0

2022-03-07